Back to Top

We ship worldwide - this is just some of the countries we ship to
  1. ICOM PW-1 HF / 6m 1kW Linear Amplifier
    [PW-1 ICOM]

    Our Price:  4,699.95

    ICOM PW-1 Wide frequency coverage with 1 KW output. All HF bands plus 50 MHz are covered. The IC-PW1 provides a stable, clean and low distortion 1 kW from 1.8 MHz to 50 MHz. In addition, full duty cycle (even during more demanding RTTY or SSTV operation) and full break -in operation are possible. Great for DX'Peditions or contest operation.
     Wide ALC adjustable range
     Internal circuitry allows the ALC to be adjusted over a wide range. This means that the IC-PW1 can be used with almost any HF, 6 m or HF/6 m rigs - not only Icom rigs! (Ask your dealer about usable exciters.)
     Compact body
     Dimensions, including amplifier, power supply, tuner and controller, are only 350 (W), 269(H), 1378 (D) mm. (approx.) And, because the controller is detachable, the IC-PW1 can be installed almost anywhere in your shack.
    IC-PW1 specifications:
     Dimensions: 350 (W),269 (H), 378 (D)mm
     Weight: 35kg (approx.)
     Auto band changing
     Four antenna connectors
     Built in auto antenna tuner
     Capable of matching 3:1 SWR on HF, and 2.5:1 SWR on 6 meters
     Matches a wide array of antennas
     4 cooling fans
     100% duty cycle (even during RTTY or SSTV)
     Full break-in operation
     Automatic AC input voltage selector
     Dual CPUs for system operation, monitoring and control
     CPU memories for automatic antenna selection and switching for fast band/antenna changes. Works with almost any make of HF, 6 Meter, or HF / 6M transceiver... not just Icom rigs. Check with your dealer.
     Frequency Coverage (MHz):
     1.800 - 1.999
     3.500 - 3.999
     7.000 - 7.300
     10.100 - 10.150
     14.000 - 14.350 (revised 5/27/99)
     1.8068 - 18.168 21.000 - 21.450 (revised 5/27/99)
     24.890 - 24.990 (revised 5/27/99)
     28.000 - 28.700 (revised 5/27/99)
     50.000 - 54.000 (revised 5/27/99)
     Current Drain:
     Less than 15 A (max. output at 200 V)
     Less than 20 A (max. output at 100 V)
     Usable temperature range: -10°C to +40°C; +14°F to +104°F.
     Power supply requirements: 180 - 264 V AC or 90 - 132 V AC (single phase; 50 / 60 Hz)
     Duty cycle: Full duty
     Input connector: SO-239 x 2 (50 ohm)
     Output connector: SO-239 x 4 (50 ohm)
     Linear Amplifier
     Output power:
     CW, RTTY: 1 kW at 180 - 264 V AC; 500 W at 90 - 132 V AC input
     SSB 1 kW PEP at 180 - 264 V AC; 500 W PEP at 90 - 132 V AC input
     Driving power: Max. 100 W
     Spurious emissions:
     Less than -60 dB (HF bands)
     Less than -50 dB (50 MHz)
     Antenna Tuner
     Output matching range (tuner switch ON):
     16.7 ohms to 150 ohms impedance (HF bands)
     20.0 ohms to 125 ohms impedance (50 MHz)
     Auto tuning accuracy: VSWR 1.5:1 or less
     Min. required input power: 60 W
     Insertion loss: Less than 1 dB (after tuning)
     Supplied Accessories
     Controller separation cable
     ACC cables
     Coaxial cable with PL-259 plugs

    works with ICOM IC-7700, IC-7800, IC-7600, IC-7000, IC-718, IC-7400, IC-706,

    Reviews