Used Power Supplies - Linear & Switch Mode
Used Power Supplies - Linear & Switch Mode, If you're looking for a Good Quality, Bench Power Supply too run your radio equipment or for test purposes, Take a look at our wide selection. If you cannot find what you need give us a call on 01922 414796
Second Hand AIM-TTI Instruments TSX-1820 20 Amp...
The TSX series represents the state of the art in medium output PSU design. The standard TSX versions of the series incorporate conventional analogue controls for precision with simplicity. Large diameter knobs and large paddle switches combine wi... view full info
Second Hand Kenwood PS-52 DC Power Supply
The Kenwood PS-52 is a heavy duty, regulated DC power supply specifically designed for use with Kenwood DC powered radio equipment. This power supply is recommended for the Kenwood TS-2000, TS-870 and TS-50S (when using AT-50). It is fitted with t... view full info
Second Hand PS-53 Kenwood 13.8V 22.5A Power Supply
The PS-53T is a heavy duty, regulated DC power supply specifically designed for use with Kenwood DC powered radio equipment. This power supply is recommended for the Kenwood TS-570 and TS-50S. It is fitted with two screw type terminals on the rear... view full info
Second Hand Heathkit SB-600 Power Supply With S...
Second Hand Heathkit SB-600 Power Supply With Speaker, The SB-series Speaker SB-600 came on the market in 1966 and was produced until 1975. It was designed to be able to hold the HP-23 family of Power Supplies for the SB-series inside the speaker ... view full info
Second Hand Yaesu FP-30 power supply for the FT...
Second Hand Yaesu FP-30 power supply for the FT-897
The FP-30 Power Supply is designed to be used in place of the internal battery. It is inserted on the inside-bottom of the radio. The bottom of the FP-30 has a flip-out tilt stand, just like the ... view full info
Second Hand PT-1012 Microset 12A 13.5 Power Supply
Second Hand PT-1012 Microset 12A 13.5 Stabilised Power Supply
* Output Volts 13.5V DC
* Output Current 12A
* Ripple 10mV RMS
* Load stability 0.4%
* Short circuit protection
* Overvoltage protection
* Cigar lighter outlet
* 2x2 quick-conne... view full info
Second Hand Sommerkamp FP-12 Linear Power Suppl...
The power supply provides an (adjustable) output voltage of 13.8 V DC at 12 amperes, 50% duty cycle. The FP-12 is designed for the FT-7B transceiver and it includes an 8 Ohm speaker. Protection,against short circuit and a 16 amperes current limiti... view full info
Second Hand Yaesu FP-80A DC Power Supply Matche...
Second Hand Yaesu FP-80A DC power supply.The Yaesu FP-80A power supply is designed for use with the FT-480R / FT-680R / FT-780R transceivers.
The FP-80A provides an output voltage of 13.8 VDC at 4.5 ampered, with excellent regulation.Specification... view full info
Second Hand EP-925 30 Amp Linear Power Supply
Second Hand EP-925 Power Supply
* Output voltage 3 - 15V DC
* Output Current 25A (30A peak)
* Malfunction protected
* Dual meters for volts & current
* Front panel terminals
* Supply 230V AC 50Hz
* Weight 9.2kg
note: ** SECOND HAND ITEM ... view full info
Second Hand Telecom 30 Amp Switch Mode Power Su...
Second Hand Telecom 30 Amp Switch Mode Power Supply, Very well made, quiet in terms of both fan noise and no measurable RF noise on any band! Snazzy looks, made in Taiwan. Input voltage: 230 VAC. Output voltage: 9-15 VDC adjustable. Protections: s... view full info
Second Hand Watson W-10AM Power Supply
Very wide appeal and versatile specification. Many RF amplifiers and mobile transceivers require a power supply able to deliver 10A or so, and the W-10AM fulfils the need admirably. Compact in size and ergonomic design, it is as much at home in th... view full info
UK & Global suppliers to military, education & government REGISTERED WITH THE OFT. UK AND INTERNATIONAL SHIPPING AVAILABLE ON ALL PRODUCTS