ADSP-2-HLK (70-12) SGC Add on ADSP Board - High Level

ADSP-2-HLK (70-12) SGC Add on ADSP Board - High Level

ADSP-2-HLK (70-12) SGC Add on ADSP Board - High Level

Price Reduction was £149.95 now £89.95 * Min audio i/p 100mV RMS * Max audio i/p 5V RMS * Max audio o/p 9V RMS * Power o/p 5W RMS * Voltage 12V DC * Current consumption idle 110mA FULL OUT 500Ma * Noise reduction 26dB * Time delay 13ms * Tone rejection -65dB * Filters (3dB b/w) Voice 300-2100Hz, CW wide 400-900Hz CW narrow 600-700Hz * Out of band rejection -45dB

SGC pioneered Automatic Digital Signal Processing (ADSP) more than 10 years ago. Internal IF based DSP is incapable of matching the performance of ADSP2 because it must devote some processor time to other tasks. ADSP2 devotes all of its time to spectral noise reduction, yielding unprecedented performance exceeding that available in top-of-the-line transceivers.

SGC have tested ADSP2 in many popular transceivers, including small portable units, and significant improvements in noise rejection have been found on every unit evaluated. The ADSP2 board adds two levels of ADSP processing and three narrow band filters which gives the user significant flexibility in choosing the processing most appropriate to the operating conditions.

ADSP2 is supplied in two versions. One for low level audio power ADSP-2 Board Low (70-11) and the ADSP-2 Board High (70-12) for high level audio power installation. Both versions contain full instructions and identify the relevant wire connections. They can be installed by the user or by a dealer.