|
IC-E92
One radio. Two bands. Digtal!
Icom proudly announces the debut of submersible dual band transceiver, ICE92D. The IC-E92D is upgraded from the IC-E91 series and most of the features are retained from the IC-E91 but provides submersible protection, equivalent to IPX7. Used with the optional HM-175GPS, the IC-E92D provides GPS position reporting functions in DV mode and GPS functions are fully compatible with IC-E2820 series. The IC-E92D and HM-175GPS are targeted to D-STAR enthusiasts, amateurs who are outdoor orientated and safety related organizations who are looking for a simple GPS position reporting system.
Other features
• IPX7submersible construction
• Optional GPS speaker-microphone, HM-175GPS
• 4-step RF power selection
• GPS position reporting functions (DV mode)
• GPS A mode for easy D-PRS operation
• Wide band receiver with dual watch receiver capability
• Large dot-matrix display
• Total 1304 memory channels
• Simple bandscope
• Keypad navigation
• One touch reply button (DV mode)
• Built-in voice recorder and auto reply voice message (DV mode)
• Optional PC remote control capability .
New features
Optional GPS speaker-microphone, HM-175GPS
Used with the newly designed GPS speaker-microphone, HM-175GPS, the IC-E92D shows your position data on the display and offers a position reporting function in DV mode. The IC-E92D shows the direction to a memory position or to a received D-STAR station with a compass like display needle. In addition, the GPS-A mode assists in easy D-PRS mode operation
IPX7 submersible construction
The IC-E92D and HM-175GPS provide superior waterproof protection equivalent to IPX7 (1m depth of water for 30 minutes). It can be used in harsh outdoor environments, when hiking, mountain biking, touring and alpine sports.
4-step RF power selection
The IC-E92D provides 5W (typ.) output power both in VHF/UHF bands. The supplied BP-256 provides up to 6/5.5 hours* of operating time. When you don't need full power operation, you can reduce output power to 2.5/0.5/0.1W (typ.) for saving battery consumption.
* VHF/UHF single mode, Tx high: Rx: Stand-by duty ratio= 1: 1: 8
Retained features
Wide band receiver with dualwatch capability
The IC-E92D has dualwatch receiver capability, allowing you to receive two bands simultaneously (V/V, U/U, V/U possible). By pushing and holding the [Main/Dual] button, you can easily turn on/off the dualwatch mode, while a press of the button allows you to toggle the active VFO channels. When in the dualwatch mode, the operating frequency and mode are restricted to 495kHz–999.990MHz in FM/WFM/AM mode (VFO A) and 118–174MHz or 350–470MHz in FM/FM-N/AM/DV mode (VFO B)*.
* See specifications page for receive range coverage.
Large dot-matrix LCD
Using a large full dot-matrix LCD (37.8 × 20 mm), the IC-E92D clearly shows two line frequency settings, alphanumeric channel name, bandscope, received short data message and GPS coordination, etc. You can change the display setting to show frequency or memory name in the center of the display. In addition automatic LCD and keypad backlight provides bright illumination for night time
Total 1304 memory channels
The IC-E92D has a total 1304 memory channels with 26 memory banks. The VFO A has 800 regular channels, 50 scan edges and 2 call channels, while the VFO B has 400 regular, 50 scan edges and 2 call channels. All memory channels, memory banks and even scan edges can be named with 8-character channel comments
Simple bandscope
Spectrum activity is visually shown on the screen and AF output is emitted while sweeping the range. It is useful for finding new or interfering signals
Keypad navigation
The 4-direction cursor buttons on the keypad gives you quick and intuitive access to many settings. The twin volume/channel knob provides convenient channel/volume setting
External DC power jack
An external DC power jack allows for operation with an external DC power supply (10–16V DC). When used with the CP-19, CP-12L or OPC-254L, simultaneous operation during charging is possible.
Built-in CTCSS/DTCS encoder and decoder
CTCSS and DTCS tones are used for accessing a closed repeater or tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone
Multiple scan functions
The IC-E92D supports various scan types for maximum reception and ease of use.
• Full scan • Selected band scan • Programmed scan • Memory scan • Memory mode scan • All bank scan • Selected bank scan • Tone scan • Bank link scan (DMS) • Program scan link • Skip scan • Priority scan
Other features
• Squelch release function to monitor a weak signal. • Auto power save, power off and power on • 10 channel DTMF memory (16-digit) • 10dB (approx) built-in attenuator
DIGITAL FEATURES
D-STAR DV mode available (Digital Voice + data)
The IC-E92D provides DV mode operation with an AMBE codec. 950 bps data can be sent simultaneously with the digital voice transmission. The IC-92AD/E92D is compatible with the JARL D-STAR format*. In addition, when you receive an FM mode (or other mode) signal while operating in DV mode, the automatic DV detection function automatically changes the operating mode to the detected mode.
* The Digital features of the IC-E92D are compatible with IC-E91 series (With UT-121), IC-E2820 series (with UT-123), ID-800H, IC-V82/U82 (with UT-118) and IC-2200H (with UT-118).
GPS position reporting function
When connecting an optional HM-175GPS, own and other station’s position information can be sent and received*. The IC- 92AD/E92D sends the position data either by holding the PTT switch, or at a preset interval (5 seconds–30 minutes), depending on the setting.
* GPS data receive only is possible when no external GPS receiver or GPS speaker-microphone is attached.
Plotting position information on mapping software
When connected to a PC* via the optional RS-232C cable, OPC-1799, the position information can be plotted on mapping software* on a PC.
* Serial port and position mapping software (NMEA 0183 format) are required.
GPS alarm
The GPS alarm sounds when your own position is close to the specified point or area.
One touch reply button
The IC-E92D has a one-touch reply function. It uses the received callsign (including repeater callsign) and allows you to call back to the calling station without hassle. In addition, up to 20 received callsigns are stored as the received call record
Built-in voice recorder and auto reply
The IC-E92D has a built-in voice recorder*. It records an incoming call in DV mode for up to 30 seconds (approx.), or can be partitioned into 3 tracks (10 seconds each). The 10-second transmit memory allows you to record your callsign, CQ and automatically answers when you receive a message. (* Available in DV mode only)
Optional PC remote control capability (Also available in analog mode)
When the IC-E92D is connected to a PC via a RS-232C cable, most functions of the IC-E92D can be controlled from the PC. In DV mode operation, you can send and receive short messages of 20 characters (Max.) on the PC
DX communication over the D-STAR system
The 144, 440MHz D-STAR repeater is now available. It allows you cross band (144 /440/1200MHz) operation and long distance communication over the D-STAR system.
Supplied accessories:(*depending on version)
Battery pack (BP-256)
Wall charger* (BC-167D)
Antenna (FA-S270C)
Belt clip (MB-111)
Hand strap
SPECIFICATIONS
GENERAL
Frequency coverage and Mode : (Unit: MHz) Version Transmit Receive (Working range)
Europe 144–146,
430–440 VFO A: 0.495–999.990
VFO B: 118–174, 350–470
Export 137–174,
400–470 VFO A: 0.495–999.990
VFO B: 118–174, 350–470
Mode : FM, FM-N, WFM*1, AM*1 DV
*1 Receive only,
Memory channels : 1304 channels (including 100 program scan edges and 4 call channels)
Useable temp. range : –20°C to +60°C;
Frequency stability : ±2.5ppm (–20°C to +60°C)
Power supply
External DC power : 7.4V DC (with BP-256)
10–16V DC
Current drain (at 7.4V DC) : Tx High (VHF/UHF)
Rx
FM (Single)
DV (Single)
FM/FM (Dual)
FM/DV (Dual) 1.8/2.1A typ.
Power save(Duty= 1:4)/Rated output/Stand-by
38mA/150mA/65mA typ.
47mA/200mA/110mA typ.
43mA/180mA/90mA typ.
50mA/200mA/110mA typ.
Tuning steps (kHz) : 5*, 6.25*, 8.33*, 9*, 10, 12.5, 15, 20, 25, 30, 50, 100, 125, 200
* Not available on all bands or modes.
Antenna impedance : 50Ω (SMA)
Dimensions (W×H×D) : 59×112×34.2 mm
Weight (approx.) : 325g; (with antenna and BP-256)
TRANSMITTER
Output power : High 5W typ. Mid 2.5W typ.
Low 0.5W typ. Slow 0.1W typ.
Spurious emissions : Less than –60dB
Max. freq. deviation : ±5.0/2.5kHz (FM Wide/narrow)
Ext. MIC connector : 2kΩ
RECEIVER
Intermediate frequency : VFO A
WFM
VFO B 61.65MHz/450kHz (Except WFM)
59.25MHz/13.35MHz/1.95MHz
46.35MHz/450kHz
Sensitivity (typical) FM (at 12dB SINAD, 3.5kHz DEV)
VHF (Ham band) 0.14μV
UHF (Ham band) 0.16μV
1.625–29.995MHz 0.4μV
30.000–75.995MHz 0.25μV
76.000–117.995MHz 0.25μV
118.000–173.995MHz* 0.14μV
174.000–259.995MHz 0.32μV
260.000–349.995MHz 0.32μV
350.000–469.995MHz* 0.16μV
470.000–599.995MHz 0.32μV
600.000–999.995MHz 0.56μV
(* Except ham bands)
WFM (at 12dB SINAD, 52.5kHz DEV)
76.000–108.000MHz 1μV
175.000–221.995MHz 1.8μV
470.000–770.000MHz 2.5μV
AM (at 10dB S/N, 30% Mod.)
0.495– 4.995MHz 1.3μV
5.000– 29.995MHz 0.56μV
118.000–136.995MHz 0.5μV
222.000–246.995MHz 0.79μV
247.000–329.995MHz 1μV
Selectivity : AM/FM Wide
FM-Narrow, DV
WFM
More than 50dB
More than 45dB
More than 300kHz/–3dB
Less than 700kHz/–20dB
Spurious and image rejection : VHF (Ham band)
UHF (Ham band) More than 60dB
More than 50dB
(IF more than 60dB)
Spurious radiation : Less than –57dBm
Audio output power(7.4V DC) : 200mW typ. at 10% distortion with an 8Ω load
Ext. speaker connector : 8Ω
All stated specifications are subject to change without notice or obligation.
--------------------------------------------------------------------------------
Options
BP-257 BATTERY CASE (2xAA).
BP- 256 BATTERY PACK - 7.4V/1620mA Li-Ion battery pack. Same as supplied
BC-177+ BC-123E Rapid battery charger Charges the BP-256 in 2.5 hours (approx.)
BC-167E WALL CHARGER 12V/500mA. Charges the BP-256 in 6 hours (approx.). Same as supplied with some versions
MB-111 Belt clip. Same as supplied
CP-12L Cigarette lighter cable with noise filter
OPC-254L For use with an external power supply. 10–14V DC required for high power output.
FA-S270C VHF/UHF Antenne. Same as supplied
AD-92SMA (8062) ANTENNA CONNECTOR ADAPTOR - Allows connection of a BNC type antenna.
LC-168 CARRYING CASE: Helps protect the transceiver from scratches, etc.
HM-174 Waterproof IPX-7 Speaker Microphone
HM-175GPS Waterproof IPX-7 Speaker Microphone with GPSnreceiver.
HM-153 EARPHONE MICROPHONE - 1 plug type microphone that attaches to your lapel, neck-tie, etc. OPC-1797 is required.
HM-131 SPEAKER MICROPHONE - Compact and durable body. Equipped with an earphone jack. OPC-1797 is required.
HM-166 Light type EARPHONE MICROPHONE - Light weight lapel clip microphone with earphone. OPC-1797 is required.
HS-85 HEADSET Allows you hands-free operation. Includes VOX, PTT, “one-touch PTT” with time out timer (TOT). OPC-1797 is required.
SP-13 EARPHONE - Provides clear audio in noisy environments. OPC-1797 is required.
OPC-1797 Plug adaptor MIC/SP cable
RS-92 Provides remote control capability from a PC. OPC-1799 is included.
OPC-474 Cloning cable
|
Click for Used Equipment 
