RIGBLASTER RR/4010/SC RIGrunner 10-way 12V Distribution Board

RR/4010/SC RIGrunner 10-way 12V Distribution Board

* Ext. Supply 13.8V (11.5 - 15V DC) 40A * 1 x 40A fused input * 3 x 25A fused outputs * 3 x 10A fused outputs * 2 x 5A fused outputs * 2 x 1A fused outputs * Over voltage Red LED * Normal voltage Green LED * Under voltage Yellow LED * Programmable audible alert * Individual LED blown fuse indicators * Electronically controlled FET switching * Automatic load sensing switching * 2m length of terminated supply cable * Standard ATC/ATO automotive fuses * Spare fuses, power lead and connectors included * 300 x 25 x 70mm * 445g

The RIGrunner 10-way 13.8V DC distribution system has ten pairs of outputs in four groups - 25A, 10A, 5A and 1A, all are individually fused. Requires 13.8V DC power source either battery or 13.8V DC power supply with current rating up to 40A. Like the other RIGrunners it is fitted with Over voltage, Normal and Under voltage indicators.

A major feature of this RIGrunner is the automatic or manual power switching. It uses an electronically controlled FET device to switch DC currents up to 100A. This FET switch is over current and over temperature protected, and should last indefinitely. The control switch in the RIGrunner does not carry any load, this being controlled through the FET. The control switch has three positions, ‘OFF’, ‘AUTO’ and ‘ALL ON’. In the ‘OFF’ position only the switched outlets are switched off. In the ‘AUTO’ position the switched outlets will automatically turn on whenever an adequate load is drawn from the (always on) MASTER outlet. In the ‘ALL ON position all of the switched outlets will be on regardless of what is connected to the master outlet.

Other RIGrunner distribution boards include the RR/4012/C 12-way, RR/4008/C 8-way and the RR/4005/C 5-way. There is also available: Gardner bender crimp toolCR/TOOL, spare DC lead PS/CBL/6 and a pack of 12 spare connector pairs C30/PK/12