Hambid for Ham radio, scanners, DAB, Shortwave & CB radios

sales@radioworld.co.ukResponse in 24 hours
Trustpilot
01922 414 796

Monday - Friday: 9:00am - 5:00pm

Saturday: 9:30am - 4:00pm

My basket: £0.00
0
Wishlist

Antenna Dummy Load,

Welcome to the Dummy Loads page. Here, you'll find links for high quality Dummy Loads covering hf-vhf-uhf. In addition, specific models mentioned in the Dummy Loads forum Like diamond antennas,comet, yaesu, icom, watson cushcraft, MFJ and more are here for future reference. Amateur radio Dummy Loads sold here, we update our stocks to keep in touch with modern improvements in antenna design.

DM-15W Watson 15W Dummy Load (PL-259)

£19.96
The Watson DM-15W 15W Dummy Load (PL-259) This budget priced dummy load is ideal for a wide range of applications. It can be used for testing lower powered transceivers and although rated at 15W, it will handle 20W on CW. * Range DC - 600 MHz * P... Read more

DM-15WN Watson 15W Dummy Load (N-Type)

£21.95
The DM-15WN DC-600MHz dummy load 15W continuous 100W 30 seconds N-Type. Read more

SHARMAN DL-30A DUMMY LOAD 15W AVG, 100W PEAK, D...

£25.99
The SHARMAN DL-30A DUMMY LOAD 15W AVG, 100W PEAK, DC-500MHZ. Read more

MFJ-261 Dry DC-500 MHz Handy Dummy Load

£32.95
The MFJ-261 Dry DC-500 MHz Handy Dummy Load.Connects directly to the transmitter with PL-259 connector. No patch cable used, reduces SWR. Finned aluminium, air-cooled heat sink. Handles 100 Watts peak, 15 Watts average. 50 Ohms. Covers DC to 500... Read more

MFJ-21 1 Gallon Industrial Grade Oil

£35.95
The MFJ-21 is a one gallon container of industrial grade transformer oil. This does not contain a PCB. It is for use with the MFJ-250X Wet Dummy Load. Read more

COMET D21M

£39.95
Comet D-21M - Dummy Load This compact dummy load covers DC-600 Mhz and is rated at 15 watts average and 100w PEP. Fitting is the very popular PL259 type. D21M - air-cooled compact dummy load Power Rating - 15 watts average 100 watts PEP Fitting -... Read more

Diamond DL-50A DC-1000MHz PL-259 Dummy Load

£40.94
The Diamond DL-50A PL-259 Dummy Load DC-1000MHz. Read more

MFJ-261N Dry DC-500 MHz Handy Dummy Load w/ N C...

£44.95
The MFJ-261N Dry DC-500 MHz Handy Dummy Load w/ N Connector. Connects directly to the transmitter with "N" Male connector. No patch cable used, reduces SWR. Finned aluminum, air-cooled heatsink. Handles 100 Watts peak, 15 Watts average. 50 Ohms.... Read more

DM-150PL Dummy Load DC-1GHz 30W (100W 1.5mins)

£44.95
The DM-150PL Dummy Load DC-1GHz 30W (100W 1.5mins). A high performance dummy load that is professionally engineered to a very high degree of construction. Note: Picture for illustration purposes. Read more

Microset CF-30 50 Ohm Dummy Load

£49.96
50 Ohm 30W Dummy Load Range DC - 850MHz - Power 15W/30W -VSWR 1.1:1 (1-500MHz), 1.5:1 (500-850MHz) - Connector N-socket - Gold plated centre pin - 50 Ohms impedance - Size 40 x 60 x 110mm - Weight 325gThe dummy load is rated continuously at 15W an... Read more

MFJ-250X MFJ 1kW Dummy Load in can (without oil)

£55.96
MFJ-250X MFJ 1kW Dummy Load in can (without oil) * 1MHz - 400MHz * Power Handling 1kW * Impedance 50 Ohms * Connector SO-239 Handles 1kW CW for 10 minutes. Rating curves supplied. You need to fill the can with transformer oil (or domestic vegetab... Read more

MFJ-260CN MFJ 300W Dummy Load N-Type

£55.96
The MFJ-260CN an air cooled, non-inductive resistor in a perforated metal housing. It has "N" connectors. You can handle a full load for 30 seconds. Silk-screened derating curve to 5 minutes. Handles 300 Watts. SWR below 1.1:1 to 30 MHz, 1.5:1... Read more

MFJ-260C MFJ 300W Dummy Load (SO-239)

£58.99
The MFJ-260C (SO-239) is an air cooled, non-inductive resistor in a perforated metal housing. It has SO-239 connectors. You can handle a full load for 30 seconds. Silk-screened curve to 5 minutes. Handles 300 Watts. SWR below 1.1:1 to 30 MHz, ... Read more

DL-300M Vectronics 300W Dummy Load (SO-239)

£64.94
The DL-300M Dummy Load simulates an accurate 50 Ohm antenna up to 150 MHz, enabling you to test your transmitter without radiating a signal on the air.Specifications: DC to 150 MHz's Handles short-term RF power up to 300 Watts. VSWR of less than 1... Read more

DM-200N Dummy Load DC-3GHz 35W (100W 2 mins.)

£64.96
DM-200N Dummy Load DC-3GHz 35W (100W 2 mins.) A high performance dummy load that is professionally engineered to a very high degree of construction. Note: Picture for illustration purposes. Read more

DL-300MN Vectronics 300W Dummy Load (N-type)

£69.95
The DL-300M Dummy Load simulates an accurate 50 Ohm antenna up to 150 MHz, enabling you to test your transmitter without radiating a signal on the air.Specifications: DC to 150 MHz. Handles short-term RF power up to 300 Watts. VSWR of less than 1.... Read more

VEC-554X Vectronics 1500W 0-400W Wet Dummy Load...

£69.95
VEC-554X Vectronics Versa Load Wet dummy load 1500 Watts 0-400MHz without oil KW dummy load lets you tune up fast! Run 1 KW CW or 2 KW PEP for 10 minutes. Run 1/2 KW CW or 1 KW PEP for 20 minutes. Run continuous duty with 200 Watts CW or 400 W P... Read more

Diamond DL-50N 100 Watt Dummy Load N TYPE

£72.95
The Diamond DL-50N 100 Watt Dummy Load from Diamond will help ensure that your radio transmitter is functioning properly.Specification:Impedance: 50 OhmLoad capacity: 15 watts continuous duty, 20 watts 5 minutes (after interval of 5 minutes), 50 W... Read more

ADL-1500X Ameritron 1.5kW Dummy Load without oil

£74.95
The ADL-1500X Ameritron 1.5kW Dummy Load without oil , * 1MHz - 400MHz * Power Handling 1.5kW * Impedance 50 Ohms * Connector SO-239, Rating curves supplied. You need to fill the can with transformer oil (or domestic vegetable oil) used as coolant. Read more

MFJ-264 MFJ 1.5kW Dummy Load (SO-239)

£82.96
The MFJ-264 1.5kW Dummy Load (SO-239) * Frequency Range 1 - 650MHz * Power Rating 1500W * 50 Ohms * Connector SO-239 (N-type also available) * Size 197 x 70 x 75mm * Weight 680g Handles 100W for 10 minutes and 1500W for 10 seconds. Usable to 750MHz. Read more

MFJ-250 MFJ 1kW Dummy Load in can (with oil)

£89.95
The MFJ-250 MFJ 1kW Dummy Load in can (with oil) * 1MHz - 400MHz * Power Handling 1kW * Impedance 50 Ohms * Connector SO-239 Handles 1kW CW for 10 minutes. Rating curves supplied. Supplied with coolant oil. Read more

MFJ-264N 1.5kW Dummy Load (N-type)

£93.95
The MFJ-264N is ham radios most versatile 50 Ohm dummy load. It does it all -- works with all radios from 160 Meters through 650 MHz and from QRP to the full 1500 Watt legal limit. The MFJ-264N has a "N" connector. You get SWR below 1.3 to 650 M... Read more

ADL-1500 Ameritron 1.5kW Dummy Load with oil

£94.96
ADL-1500 Ameritron 1.5kW Dummy Load with oil,* 1MHz - 400MHz * Power Handling 1.5kW for 5 minutes * Impedance 50 Ohms * Connector SO-239 * Size 190.5 x 168mm. Rating curves supplied. Supplied with coolant oil. Read more

VEC-554 Vectronics 1500W 0-400W with oil

£94.96
The VEC-554 Versa Load™ KW dummy load lets you tune up fast! Run 1 KW CW or 2 KW PEP for 10 minutes. Run 1/2 KW CW or 1 KW PEP for 20 minutes. Run continuous duty with 200 Watts CW or 400 W PEP. Complete with derating curve. Quality 50 ohm no... Read more