New
ATT2 Attenuator Pad
Click the image to enlarge

bhi Noise Reduction products

BHI ATT2 Attenuator Pad - control the audio input on your BHI ParaPro EQ20 audio DSP unit.

£0.00
(£0.00 exc. VAT)
£24.95
(£20.79 exc. VAT)
Fast uk delivery
Worldwide delivery
In Stock
Qty:
0 Reward points
Product code: ATTU
Download a pdf document for BHI ATT2 Attenuator Pad - control the audio input on your BHI ParaPro EQ20 audio DSP unit.

Want to be notified when this product is back in stock? Complete the form below and we'll send you an email when it is.

Finance Available

Radioworld now offer finance through our partners Close Brothers.

Add the item to your basket in the normal way and at checkout choose to make payment via Finance. You’ll then be taken through to our partners Pay4Later to make your finance application.

Item CostFinance OptionDepositMonthly PaymentsTotal Cost
£24.95
12 Months 14.9% APR
£2.49
£2.15
£28.29
£24.95
18 Months 14.9% APR
£2.49
£1.43
£28.29
£24.95
24 Months 14.9% APR
£2.49
£1.07
£28.29
£24.95
36 Months 14.9% APR
£2.49
£0.72
£28.29
£24.95
48 Months 14.9% APR
£2.49
£0.54
£28.29
£24.95
12 Months 19.5% APR
£2.49
£2.24
£29.33
£24.95
18 Months 19.5% APR
£2.49
£1.49
£29.33
£24.95
24 Months 19.5% APR
£2.49
£1.12
£29.33
£24.95
36 Months 19.5% APR
£2.49
£0.75
£29.33
£24.95
48 Months 19.5% APR
£2.49
£0.56
£29.33

Makes it easier to control the audio input on your BHI ParaPro EQ20 audio DSP unit, The BHI ATT2 attenuator pad is used to convert the high-level audio signals you typically get from amateur radio transceivers and receivers to a low level, making the audio equipment easier to use.  The ATT2 was mainly designed for use with the BHI ParaPro EQ20 range of parametric audio DSP units, but can also be used with other audio equipment provided the parameters of the equipment are within the specification of the ATT2.  The ATT2 is a passive device and effectively enables a wider range of AF/volume adjustment to be used before the overload LED on the BHI ParPro EQ20 unit comes on, making it less sensitive and easier to use.  The ATT2 accepts mono or stereo speaker level signals up to 1 Watt (2.828 Volts p-p into an 8 Ohm Speaker) and will attenuate the audio down to line level at around 1 Volt (line level at 10k). 

The operation, The ATT2 unit simply fits between the extension speaker socket of your radio (high-level audio source) and your BHI ParaPro EQ20/EQ20-DSP unit or audio equipment. 

Note: Use the audio isolated LLC1 if you encounter any stray RF or earth loop issues.

Features, Converts high-level audio signals to low-level audio,

Accepts mono or stereo speaker level signals,

Input Impedance: 11 Ohms,

Output Impedance: 10 k Ohm,

Maximum Input Power: 2 Watts

Output level: Line level 1 Volt P-P into 10 k Ohm