D2T 2-element compact antenna covers 1.5 to 200MHz

D2T Giovannini Electromeccanica

D2T 2-element compact antenna covers 1.5 to 200MHz

£0.00
(£0.00 exc. VAT)
£569.95
(£474.96 exc. VAT)
Qty:
0 Reward points
Product code: D2T 2-element
Download a pdf document for D2T 2-element compact antenna covers 1.5 to 200MHz
Finance available on baskets over £250 view details

Want to be notified when this product is back in stock? Complete the form below and we'll send you an email when it is.

Finance Available

Radioworld now offer finance through our partners Close Brothers.

Add the item to your basket in the normal way and at checkout choose to make payment via Finance. You’ll then be taken through to our partners Pay4Later to make your finance application.

Item CostFinance OptionDepositMonthly PaymentsTotal Cost
£569.95
12 Months 14.9% APR
£57.00
£49.12
£646.38
£569.95
18 Months 14.9% APR
£57.00
£32.74
£646.38
£569.95
24 Months 14.9% APR
£57.00
£24.56
£646.38
£569.95
36 Months 14.9% APR
£57.00
£16.37
£646.38
£569.95
48 Months 14.9% APR
£57.00
£12.28
£646.38
£569.95
12 Months 19.5% APR
£57.00
£51.08
£669.98
£569.95
18 Months 19.5% APR
£57.00
£34.05
£669.98
£569.95
24 Months 19.5% APR
£57.00
£25.54
£669.98
£569.95
36 Months 19.5% APR
£57.00
£17.03
£669.98
£569.95
48 Months 19.5% APR
£57.00
£12.77
£669.98

D2T Giovannini Electromeccanica HF-VHF Antenna

* 1.5 - 200MHz continuous

* 1kW PEP 1.5 - 80MHz

* 500W PEP 80 - 200MHz *

Input 50 Ohms

* VSWR 1.3:1 - 1.9:1 (manufacturers data)

* 2 x elements 6m

* Turning radius 3.6m

* Boom length 2m

* Mast 40 - 50mm

* Max wind speed 150km/h

* Connector SO-239

* Weight 8.5kg (approx)

The D2T 2-element compact antenna covers 1.5 to 200MHz continuously 1kW PEP. Constructed with 2m boom, 2x 6m elements and weighing 8.5kg. No ATU is needed, and only one feeder of 50 Ohm coax is required. The whole assembly can be rotated by a lightweight rotator.
Adapted from a military design (the manufacturer’s main business) the dipole element is directly fed with coax cable via a balun, and the reflector is fed through a phasing section and is terminated with an 820 Ohm resistor.
The manufacturer recommends that the antenna is fed by 60m of feeder laid straight out and not coiled. Alternatively reduction of RF and feeder length can be reduced by introducing a line isolator into the line.