£214.96
ADD TO BASKET
Click the image to enlarge
DL-2500N Vectronics 2.5kW Dummy Load (N-type)
£0.00
(£0.00 exc. VAT)
£279.95
(£233.29 exc. VAT)Finance Available
Radioworld now offer finance through our partners Close Brothers.
Add the item to your basket in the normal way and at checkout choose to make payment via Finance. You’ll then be taken through to our partners Pay4Later to make your finance application.
| Item Cost | Finance Option | Deposit | Monthly Payments | Total Cost |
|---|---|---|---|---|
£279.95
|
12 Months 14.9% APR
|
£27.99
|
£24.12
|
£317.49
|
£279.95
|
18 Months 14.9% APR
|
£27.99
|
£16.08
|
£317.49
|
£279.95
|
24 Months 14.9% APR
|
£27.99
|
£12.06
|
£317.49
|
£279.95
|
36 Months 14.9% APR
|
£27.99
|
£8.04
|
£317.49
|
£279.95
|
48 Months 14.9% APR
|
£27.99
|
£6.03
|
£317.49
|
£279.95
|
12 Months 19.5% APR
|
£27.99
|
£25.09
|
£329.08
|
£279.95
|
18 Months 19.5% APR
|
£27.99
|
£16.73
|
£329.08
|
£279.95
|
24 Months 19.5% APR
|
£27.99
|
£12.55
|
£329.08
|
£279.95
|
36 Months 19.5% APR
|
£27.99
|
£8.36
|
£329.08
|
£279.95
|
48 Months 19.5% APR
|
£27.99
|
£6.27
|
£329.08
|
Fan cooled DL-2500 Dummy Load simulates an accurate 50 Ohm antenna up to 60 MHz, enabling you to test your transmitter without radiating a signal on the air. 115 VAC to 12 VDC adaptor is included.
Specifications:
DC to 60 MHz.
Handles short-term RF power up to 2500 Watts.
VSWR of less than 1.3:1 at 30 MHz.
Power dissipation: 2500 Watts average up to one minute maximum.
Fan must be used at high power levels.
Duty Cycle: 10% with fan.
Voltage Gradient: 10 kV per inch.
Resistor type: Dispersed carbon particles fired in a ceramic matrix.
Energy Density: 7000 joules/inch/second.
Weight: 5 lbs.
N Connector
Others who viewed this item WERE ALSO INTERESTED IN...
Palstar DL1500 1.5kW HF Dummy Load
The Palstar DL1500 1.5kW HF Dummy Load Enables Short Term Off Air Testing Up To 1500 Watts For Frequencies Up To 500 MHz,Dimensions: 2.75" H x 3.5" W ...
£214.96
£94.96
OUT OF STOCK
VEC-554 Vectronics 1500W 0-400W with oil
The VEC-554 Versa Load™ KW dummy load lets you tune up fast! Run 1 KW CW or 2 KW PEP for 10 minutes. Run 1/2 KW CW or 1 KW PEP for 20 minutes. Run co...
£94.96
£47.95
ADD TO BASKET
MFJ-261N Dry DC-500 MHz Handy Dummy Load w/ N Connector
The MFJ-261N Dry DC-500 MHz Handy Dummy Load w/ N Connector. Connects directly to the transmitter with "N" Male connector. No patch cable used, reduce...
£47.95
£40.94
ADD TO BASKET
£199.96
OUT OF STOCK
Microset CF-800 50 Ohm Dummy Load D.C. TO 1000 MHz
50 OHM ANTENNA DUMMY LOAD FREQ. D.C. TO 1000 MHz, Antenna dummy load of very good performance developed for many different applications, for HF - VHF ...
£199.96
£449.95
OUT OF STOCK
Palstar DL-2K 2000 Watt Dummy Load
The Palstar DL2K 2000 Watt dummy load was born out of the need for a dummy load that allows for more time to tune your amp. Most dummy loads, don't ha...
£449.95
£95.99
ADD TO BASKET
MFJ-250 MFJ 1kW Dummy Load in can (with oil)
The MFJ-250 MFJ 1kW Dummy Load in can (with oil) * 1MHz - 400MHz * Power Handling 1kW * Impedance 50 Ohms * Connector SO-239 Handles 1kW CW for 10 min...
£95.99
£69.95
OUT OF STOCK
SHARMAN DL-1000AN DUMMY LOAD PL-259
Sharman DL-1000AN Dummy Load DC-1GHzMax Input - 250 watts (MAX) 5 Seconds Continuous 35 Watts VSWR 1.1DC - 600MHz VSWR 1.16 - 600 Mhz 1GHz
£69.95
£69.95
OUT OF STOCK
Sharman DL-1000AN Dummy Load N Type
Sharman DL-1000AN Dummy Load DC-1GHz, Max Input - 250 watts (MAX) 5 Seconds Continuous 35 Watts, VSWR 1.1DC - 600MHz,VSWR 1.16 - 600 Mhz 1GHz.
£69.95
£94.96
OUT OF STOCK
ADL-1500 Ameritron 1.5kW Dummy Load with oil
ADL-1500 Ameritron 1.5kW Dummy Load with oil,* 1MHz - 400MHz * Power Handling 1.5kW for 5 minutes * Impedance 50 Ohms * Connector SO-239 * Size 190.5 ...
£94.96
£49.96
OUT OF STOCK
Microset CF-30 50 Ohm Dummy Load
50 Ohm 30W Dummy Load Range DC - 850MHz - Power 15W/30W -VSWR 1.1:1 (1-500MHz), 1.5:1 (500-850MHz) - Connector N-socket - Gold plated centre pin - 50 ...
£49.96
£39.95
ADD TO BASKET
MFJ-21 1 Gallon Industrial Grade Oil
The MFJ-21 is a one gallon container of industrial grade transformer oil. This does not contain a PCB. It is for use with the MFJ-250X Wet Dummy Load.
£39.95
£119.95
ADD TO BASKET
MFJ-264N 1.5kW Dummy Load (N-type)
The MFJ-264N is ham radio's most versatile 50 Ohm dummy load. It does it all -- works with all radios from 160 Meters through 650 MHz and from QRP to ...
£119.95
£99.95
ADD TO BASKET
VEC-514 Tuner extender for auto tuner
VEC-514 Tuner extender for auto tuner, Does your HF rigs automatic tuner have limited range? Cant auto-tune your antenna on all bands? Have to pretu...
£99.95
£69.95
OUT OF STOCK
VEC-554X Vectronics 1500W 0-400W Wet Dummy Load in can
VEC-554X Vectronics Versa Load Wet dummy load 1500 Watts 0-400MHz without oil KW dummy load lets you tune up fast! Run 1 KW CW or 2 KW PEP for 10 minu...
£69.95
£67.96
OUT OF STOCK
MFJ-260CN MFJ 300W Dummy Load N-Type
The MFJ-260CN an air cooled, non-inductive resistor in a perforated metal housing. It has "N" connectors. You can handle a full load for 30 seconds. S...
£67.96
£21.95
OUT OF STOCK
DM-15WN Watson 15W Dummy Load (N-Type)
The DM-15WN DC-600MHz dummy load 15W continuous 100W 30 seconds N-Type.
£21.95
£72.95
OUT OF STOCK
Diamond DL-50N 100 Watt Dummy Load N TYPE
The Diamond DL-50N 100 Watt Dummy Load from Diamond will help ensure that your radio transmitter is functioning properly.Specification:Impedance: 50 O...
£72.95
£69.95
ADD TO BASKET
MFJ-250X MFJ 1kW Dummy Load in can (without oil)
MFJ-250X MFJ 1kW Dummy Load in a can (without oil) * 1MHz - 400MHz * Power Handling 1kW * Impedance 50 Ohms * Connector SO-239 Handles 1kW CW for 10 m...
£69.95