HF Export Land Mobile Transceiver, Communication can be a difficult challenge when working in a remote area, and the more isolated you are, the tougher it can be. With the Icom IC-F8101 HF Mobile Transceiver, over-the-horizon contacts are a whole lot easier!

The IC-F8101 is designed specifically for long distance radio communications. It operates on HF frequencies from 500kHz to 29.9999MHz and transmits with up to 125W PEP (Peak envelope Power). The IC-F8101 supports SSB, AM, CW and Data operating modes and has the latest Digital Signal Processor (DSP) technology for improvement in both transmitter and receiver performance. The Clear Talk function utilizes DSP to separate the noise from signals for clearer audio.

Three different controller configurations

Three different controller configurations are available to suit almost any way of use/installation that may be required

1. Controller attached configuration

Ideal for standard desktop use or quick set-up in a field station.

2. Detached controller configuration

Stow the RF unit in a place of convenience during in-vehicle installation or where space is at a premium.

3. Remote-controller microphone configuration

Increases the user’s ability to operate more features of the radio safely, especially during mobile operation.

ALE (Automatic Link Establishment)

ALE is a system that automatically selects the most suitable channel and establishes a communication link. ALE provides interoperability with other 2G ALE manufactures compliant with the FED-STD-1045A ALE standard. ALE individual call, net call, sounding and AMD (Automatic message display) are available.

Selcall (Selective Calling)

The IC-F8101 provides CCIR493 based 4/6 digit open standards Selcalls, commonly used in HF networks and calls based on the 4/6 digit scheme used in the Icom IC-F7000. Selcall types: selective calling, phone call, message call, position call, status call, emergency call and channel test call. Stun command remotely disables radio operation.

Compact and Durable

The IC-F8101 has a durable, enclosed structure securely sealed from intrusion by all potential elements, and is a visibly compact package. The IC-F8101 and the CFUF8100 cooling fan unit has been tested to MIL-STD-810-G and IP54 ratings. Also, connection cables and connectors are IP54 water resistant.

125W of Powerful RF Output

A full 125W output power at full duty cycle voice mode operation is possible with the fanless design. A 25% duty cycle operation is possible in the data mode (Maximum 5 minutes of continuous transmission). When used with the CFU-F8100 optional external cooling fan unit, the IC-F8101 ensures full duty cycle data and voice mode operations for absolute reliability during long continuous transmit cycles, or for operation in hot climates

BITE (Built-in Test Equipment) Function

You can check the transceiver's condition by using the BITE capability. Auto, logic, receiver, and transmitter are selectable.

User-Friendly Operation

The IC-F8101 is designed for simple, straightforward operation. The Administrator/User access feature limits the functions that can be accessed by the user. The Administrator can enter the operating frequency and assign memory channels from the front panel or the remote control microphone. The following functions can be assigned to the [I], [II], and [III] function buttons: Main menu, Manager menu, Set mode, Selcall address list, RX history, and TX history.

Clear Talk Function

The clear talk function separates signals from noise using the DSP, and gives you clearer audio at the touch of a button.

Mute Functions

The IC-F8101 has 3 types of mute functions: call squelch, S-meter squelch and voice squelch. The call squelch function opens the squelch only when receiving a Selcall or ALE call sent intentionally to this station, and provides quiet standby.

Digital Signal Processor (DSP)

The latest DSP technology improves both the transmitter and receiver performance. The digital IF filter provides flexible filter settings for narrow band signals.

GPS Receiver Connection

When connected to an external GPS receiver*, the IC-F8101 can send current position data to other stations, and show position information, time, elevation and course heading on the display.

* NMEA 0183 Version 3.01 compatible.

Data Communications

The IC-F8101 has the capability to install a RapidM TC4 HF Data Modem Module* internally. This allows you to send and receive HF e-mails using a PC. * A third party product.

USB Port for PC Connection

The IC-F8101 can be connected to a PC through a USB port for HF e-mail and modulation input.

Many More Features

- Multiple operating modes (SSB, AM, CW and Data mode)

- 500kHz to 29.999MHz general coverage receiver (TX: 1.6MHz to 29.999MHz) and VFO mode operation

- 500 Selcall, 500 ALE address memories

- ±0.3ppm frequency stability (–30˚C to +60˚C)

- TX Power protection (PA unit high temperature, high SWR, low battery)

- Display mode: SWR, voltage, clock, GPS position, direction and elevation