About jncradio nanovna-f v2 - 3g mini vector network analyzer

Nanovna-f_v2 is a new generation of portable, stand-alone vector network analyser with a 4.3″ ips LCD screen, metal enclosure, 5000 mah battery, and sma connectors. It is a product based on edy555’s nanovna and owocomm’s s-a-a-v2. The measurement frequency range of nanovna-f v2 is up to 3ghz. The s21 dynamic range is greater than 70db at 50khz-1.5ghz and greater than 60db at 1.5ghz – 3ghz. Nanovan-f v2 can work continuously for 7 hours due to the large capacity battery and low-power design.

Features/specifications: Frequency range: 50khz ~ 3ghz,

S11 dynamic range: 50db(50khz ~ 1.5ghz), 40db(1.5ghz ~ 3ghz),

S21 dynamic range: 70db(50khz ~ 1.5ghz), 60db(1.5ghz ~ 3ghz),

Rf output power: -9dbm,

Frequency tolerance: 0.5ppm,

Screen: 4.3″ ips lcd, 800*480, rtp touchpad,

Operation via touch screen or 3 side buttons,

Battery: 3.7v li-po, 5000mah,

Aluminium enclosure: 125mm x 75mm x 20mm,

Sma female rf port,

Sweep points: 101,

Calibration result storage: 5,

Calibration result interpolating supported,

Traces: 4,

Markers: 4,

Measures: s-parameter, VSWR, smith chart, phase, polar, etc.

Mark table can be moved up and down,

Firmware upgrade via u-disk with type-c cable,

USB power output: 5v/1a,

Compatible with nanovna-saver, support screenshot,

Ce&fcc,

Rohs certified,

Included in the box: Nanovna-f v2 x1, 20cm sma-jj rg405 cable x2, Calibration kit: sma open/short/50ohm load, Sma-kk adapter x, Sma-jj adapter x1, Sma-jkw adapter x1

USB type-c cable x, Stylus x1.