Hambid for Ham radio, scanners, DAB, Shortwave & CB radios

sales@radioworld.co.ukResponse in 24 hours
01922 414 796

Monday - Friday: 9:00am - 5:00pm

Saturday: 9:30am - 4:00pm

My basket: £0.00

LDG Electronics

We Sell New LDG Electronics Products including automatic antenna tuners, Build to interface with Yaesu, Icom, kenwood,And alinco Radios, Just a press of a button and your antenna is tuned , Wide Range at the lowest prices guaranteed,

LDG AT-1000ProII HF-6M Automatic Antenna Tuner

LDG Electronics has refined and expanded its flagship 1KW tuner. The new AT-1000ProII keeps many of the same features of the previous model, but simplifies the operation. With the two position antenna switch there are 2,000 memories that store tun... Read more

LDG RT-600 Automatic Outdoor Antenna Tuner with...

LDG RT-600 has announced the RT-600 remote tuner. The RT-600 is a 600 watt PEP coax in / coax out remote tuner designed to be placed near the feed point of the antenna. If you are worried about power or signal loss due to SWR in your feed line, th... Read more

LDG AT-600ProII Automatic Antenna Tuner

The LDG AT-600ProII will handle up to 600 watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz's It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna... Read more

LDG AT-200 ProII Auto Antenna Tuner

The LDG AT-200 ProII Auto antenna tuning unit, Many QRP operators have a small 100-150 watt amplifier for times when you need a few more S-units. The AT-200 is ideal for this kind of operation; it’s minimum required power is only 5 watts, but it... Read more

LDG RT-100/RC-100 100w coax in /out remote tune...

Tuner and controller. The RT-100 is a 100 watt coax in / coax out remote tuner designed to be placed near the feedpoint of the antenna.If you are worried about power loss due to SWR in your feedline, the RT-100 is the answer. Place the RT-100 near... Read more

LDG YT-1200 Automatic Antenna Tuner for FT-450...

New Version for Yaesu radios and are among the best, and LDG makes several dedicated tuner for several models, but that leaves a big chunk of the newer Yaesu product line with no dedicated tuner. Of course, most LDG tuners will work just fine with... Read more

LDG AT-100ProII Automatic Antenna Tuner

LDG AT100ProII is the next step in the evolution of the automatic tuner. This desktop tuner covers all frequencies from 1.8 – 54 MHz, and will automatically match your antenna in no time.Updated features include an LED indicator for antenna sele... Read more

LDG KT-100 tuner for Kenwood radios

The KT-100 auto tuner for Kenwood radio by ldg electronics, Nothing beats the convenience of a dedicated antenna tuner. Matched to your specific rig, you just press the Tune button on the radio, and the rig and tuner do the rest: reduces power, tr... Read more

LDG YT-100 AUTO ATU FOR FT 857, FT 897 and FT-100

The LDG YT-100 AUTO ATU FOR FT 857, FT 897 and FT-100-RF Power: 1 to 100 watts SSB, CW and digital modes. Latching relays for ultra low power consumption, Built-in CAT interface for FT-100(D), 857(D) and 897(D) radios. Powered from Yaesu radio ov... Read more

LDG IT-100 Auto tuner For Icom Transceivers

The LDG IT-100 is the ideal tuner for your IC-7000, IC-7100 and many other Icom radio's.Icom ic-7000 antenna tuner, First, it matches up to 10:1 SWR (4 to 800 ohm loads (16 to 150 on 6M), 4 to 3200 ohms with optional 4:1 Balun), so just about anyt... Read more

LDG Z-11ProII Automatic antenna tuning unit

The LDG Z-11ProII Automatic antenna tuning unit,Everything you always wanted in a small, portable tuner designed from the ground up for battery operation. It handles 0.1 to 125 watts, making it ideal for both QRP and standard 100 watt transceivers... Read more

LDG Z-100 Plus Automatic ATU

The LDG Z-100plus Automatic ATU. Still small and simple to use, the Z-100Plus sports 2000 memories that store both frequency and tuning parameters. It will run on any voltage source from 7 to 18 volts; six AA batteries will run it for a year of no... Read more

LDG Z-817 Automatic QRP ATU FT-817/818 QRP tran...

The Z-817 is FT-817/818 QRP transceiver ultimate autotuner for QRP radios including the Yaesu FT-817(D). The Z-817 interfaces to the CAT port (ACC) on the back of the FT-817 radio with the provided cable. Tuning could not be simpler; one button pu... Read more

LDG FTL-Meter Power output, SWR, modulation, AL...

LDG FTL-Meter for FT-857/FT-897 Receive: S-Meter, Discriminator or Voltage Transmit: RF Power, SWR, Modulation, ALC or Voltage Cable length 3 feet Sensitive 500 uA meter movement Externally powered cool blue backlighting On/Off switch for backligh... Read more

One Touch Tune Interfacing Cable for Kenwood

Kenwood One-Touch-Tune. Microprocessor based interface providing DC power and intelligent communications between the radio and the autotuner. Supported Radios: TS-2000, TS-450S, TS-50S, TS-570, TS-690S, TS-850S, TS-870S (any radio that supports th... Read more

LDG Yaesu One-Touch-Tune Interface

The LDG Y-OTT Yaesu One-Touch-Tune Interface is a simple, convenient, and intelligent interface for your Yaesu radio and LDG autotuner. You can now power your tuner directly from the radio (except for the FT-817), reducing the need for an addition... Read more

LDG ALK-2 Audio Linear Key Switch

The ALK-2 is a switch box for speakers, keying lines, ALC lines or whatever you need. It has two switched and one common set of jacks in the back: 1/8th inch stereo and RCA jacks in parallel. On the front, a push-in/push-out selects the port, and ... Read more

LDG USB Interface Cable For AT-1000Proii Or AT-...

The USB-100 cable allows the AT-1000ProII or AT-600ProII to be controlled from a PC by connection of a USB port. LDG will has beta software available (no computer support and source code is not available). The cable uses the FTDI FT230XS TTL seria... Read more

LDG RU-4:1 Unun balun

The RU-4:1 Unun was designed to allow easy interface of LDG S9 vertical antennas to the LDG line of Automatic Antenna Tuners. The 200 watt Unun also operates "stand alone", thus does not require an LDG Tuner for resonant verticals. It may also be ... Read more

LDG RBA-1 4:1 Balun

The RBA-1 4:1 Balun was designed to allow easy interface of ladder line antennas and long wires to the LDG line of Automatic Antenna Tuners. The Balun operates "stand alone", thus does not require an LDG Tuner. It may be used with any of your long... Read more

LDG RBA-1 1:1 Balun

The RBA-1 1:1 Balun was designed to allow easy interface of ladder line antennas and long wires to the LDG line of Automatic Antenna Tuners. The Balun operates "stand alone", thus does not require an LDG Tuner. It may be used with any of your long... Read more

LDG YT-1200 And YT-450 Processor Upgrade

The YT-1200 now has a V1.1 chip available that includes Yaesu FT-450, FT-450D, FT-950, FT-991, FT-991A, FTdx-1200, FTdx-3000 radios. The upgrade adds seamless operation with the FT-991 and FT-991A as well as allowing the user to choose any baud ra... Read more

LDG Replacement Interface Cable For IT-100 and ...

Icom cable for IT-100 and AT-7000, replacement Interface Cable for the IT-100 & AT-7000, Simple plug and play! Read more

LDG MP-AL Interface cable for Alinco

LDG MP-AL Interface cable for AlincoLimited stock Read more