LDG Electronics Z-100A Automatic Antenna Tuner and Interface Cables, LDG Electronics' Z-100A Automatic Antenna Tuner and Interface Cables Package is a special, limited-time offer that includes every available transceiver interface cable. The very reasonable pricing of the LDG-Z-100A-DXE simplifies your tuner and cable purchase by eliminating the guesswork of choosing the correct interface cable. Order this great 'tuner and all interface cables' package deal while you can, exclusively from DX Engineering! These great Z-100A-DXE tuners feature LDG's famous 10:1 SWR tuning range that matches Dipoles, Verticals, End-Fed wires, G5RVs or even Off Center Fed dipoles and Windham antennas. Easy integration with dozens of modern transceivers means plug-and-play operation could not be simpler. The updated compact and lightweight tuner goes anywhere with any HF radio—desktop, portable, parks, islands, or tall summits. The Z-100A-DXE Automatic Antenna Tuner package works with all HF radios up to 125 watts RF output (30 watts digital) and can be interfaced with dozens of modern transceivers. An interface cable isn't required for semi-automatic operation. Whether or not the Z-100A-DXE tuner is interfaced with the transceiver, it has an internal frequency counter and 2,000 memories to store each operating frequency with antenna tuning parameters. Memory retuning occurs in only 100 milliseconds, with the initial full tuning cycle requiring an average of only 6 seconds. Included with the Z-100A-DXE is the IC-104 DC power cable to run the tuner for any radio that is not interfaced. Simply key up the radio at low power, push the TUNE button on the Z-100A-DXE, and the built-in frequency counter initiates the tuning cycle. Also included with the LDG-Z-100A-DXE are ALL six interface cables for Yaesu, Kenwood, Icom and Alinco. Here is a listing of included Interface Cables, Compatible Transceivers and how each of them function: Press Button on Tuner – Interface keys radio automatically: - IC-108 Yaesu FT-891, 991A, -991, -857, -897, -100 - IC-109 Yaesu FTdx1200, FT-950, -450 (10-pin mini-DIN LINEAR Port must be used on these models) - IC-115 Yaesu FTdx-101D, FTdx-3000 - IC-105 Alinco EDX-2 Compatible, DX-70, DX-77 Press Button on Tuner or Radio – Interface keys radio automatically: - IC-100 ICOM AH-3 or AH-4 Compatible (See Applications tab for all ICOM models) Key Radio and Press Button on Tuner: - IC-106 KENWOOD AT-300 Compatible (See Applications tab for all Kenwood models) - IC-105 ALINCO SR8T, SR9T Power Only – Included with Z-100A-DXE for Key Radio and Press Button on Tuner semi-automatic operation with any HF transceiver up to 125W SSB/CW, 30W Digital: -IC-104 Power, Ground, Key, Start LDG Electronics Z-100A-DXE Automatic Antenna Tuner Specifications: Frequency Range: 1.8 to 54 MHz Power: 125W PEP SSB and CW, 30W Digital Input Impedance: 50 ohms Connectors: SO-239/UHF Female Tuning Range: 10:1 SWR, 3:1 on 6M Memories: 2000 Retune Time: Less than 1.0 second Voltage: 13.8 VDC +/-15% Current Draw: 500 mA tuning, 20 mA idle Dimensions (WHD): 6.30 x 1.50 x 6.30 in., 160 x 40 x 160 mm Weight: 1.50 lbs., 680 g LDG continues to set new standards for auto-tuners and accessories in amateur radio service. LDG Electronics is a family-owned and operated company dedicated to bringing innovative, quality products to the amateur market. Their focus is anticipating and meeting customer needs and providing world-class support.