Hambid for Ham radio, scanners, DAB, Shortwave & CB radios

sales@radioworld.co.ukResponse in 24 hours
01922 414 796

Monday - Friday: 9:00am - 5:00pm

Saturday: 9:30am - 4:00pm

My basket: £0.00
LDG Electronics
LDG AT-600ProII Automatic Antenna Tuner
LDG AT-600ProII Automatic Antenna Tuner
LDG Electronics
LDG AT-600ProII Automatic Antenna Tuner
£384.95 (£320.79 exc. VAT)
Download a PDF document for LDG AT-600ProII Automatic Antenna Tuner
Fast UK
Add to wishlist
Product code:AT-600ProII
Brand:LDG Electronics

The LDG AT-600ProII will handle up to 600 watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz's It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted vs., slope's, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-600ProII with long wires, random wires and antennas fed with ladder line just by adding a balun. The AT-600ProII features two antenna ports with a front-panel indicator showing which is in use, and separate memory banks for each antenna. The optional M-600 4.5" analog meter shows FWD (100 and 600W scales), REV, or SWR in Peak or Average. Easy to read LED bar-graph meters showing RF power, SWR and tuner status, tactile feedback control buttons and an LED bypass indicator complete the user interface. Any power source from 11 – 16 volts DC can be used; the AT-600ProII only draws up to 750mA.

600 Watts SSB and CW, 250 watts on 6M. 250 watts PSK and digital
Easy to read LED bar graph display for RF power, SWR and status
Optional M-600 4.5 inch analog meter
4,000 memories for instantaneous band changing
Two position antenna switch with memories for each position
Tuning time: 0.5 to 6 seconds full tune, 0.1 second memory tune
Built in frequency counter for memory operation
Frequency coverage: 1.8 to 54.0 MHz
Tunes 6 to 800 ohm loads (16 to 150 ohms on 6M)
For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna
Includes DC power cable
Power requirements: 11 to 16 volts DC at 750 mA max during tuning
Enclosure: 10.5D x 8.5W x 2.5H inches
Weight: 3 pounds