MT1200G Wireless Modem comes with optional embedded GPS

MT1200G Wireless Modem comes with optional embedded GPS

Built on the proud heritage of the Kantronics KPC-3+, the very compact MT1200 and MT1200G Mobile Tracker allow users to transmit real-time vehicle tracking information for use in APRS networks or NMEA interface mapping software packages. Kantronics has developed the MT1200 units to meet the needs of today, with an eye toward emerging applications. Able to communicate in a variety of formats, including TCP/IP, and LSUB, the MT1200 units are seamless and transparent radio link substitutes.

The MT1200 and MT1200G may be utilized within an existing packet network, using the Mobile Tracker unit as a mobile, and a Kantronics legacy TNC at the base. The basic Kantronics MT1200 may be used with an external NMEA GPS receiver and the Kantronics MT1200G includes an embedded GPS with active magnetic mount antenna. Both MT1200 versions include 512K flash memory for extended GPS or temetry data logging or storage.

Mobile Tracker units are ideal for a variety of roles. They are well made, engineered for dependability and low in cost. It's no wonder Kantronics units are in use around the world.

MT1200 Applications Include:

•"Keyboard to keyboard" communications
•GPS position transmitting and tracking (with built-in GPS receiver on the MT1200G,
or the MT1200 and external NMEA-0183 compatible GPS)
•Remote control devices
•Remote access of telemetry data
•Digipeater (suitable for remote locations)
•GPS beacon data logging
The MT1200 can be used in the field with a radio to form a mobile data terminal, or (with the internal GPS option or the addition of an external GPS receiver) a GPS mobile "tracker".

MT1200 Features:

•APRS Beaconing of GPS-derived information
•Fixed or adaptive GPS beacon rate for optimal use of bandwidth
•MT1200: external GPS capable
•MT1200G: embedded GPS receiver
•PTT Activated data burst
•Remote Control and telemetry functions with two A/D inputs,
three opto-isolated digital inputs, and two control line outputs
•AX.25, KISS, XKISS, LSUB, PING operating modes
•Field upgradeable as new firmware is released
•Low current requirements
•Use with base, mobile or hand-held radios•Made in the USA -- Limited one year warranty to original purchaser

MT1200 Specifications:

Dimensions (H×W×D) 0.95"×4.9"×3.0" (24 mm × 125 mm × 76 mm) (including mounting tabs)
Weight 4.8 oz (0.136 kg)

Power Requirements   
    Voltage  DC 12 V nominal
    Current  < 35 mA (LEDs on, unit active, no GPS)
<75 mA (LEDs on, GPS active w/antenna) 
External Power Connector  RIA Connect RIACON series, type 169, 3 pin (31169103)
External Signal Ports  DB-9 female (radio port)
DB-9 female (computer/data terminal)
Telemetry plug - RIA Connect PlugCon series, type 374, 10 pin (ASP05110)
Analog Measurement Inputs
(A/D Converter) Two inputs; 0 V to +3.3 V, 8-bit accuracy 
Radio Port  
Data Rate 1200 bps
External Carrier Detect  Pulldown to ground (normal or inverted)
PTT Output  Open drain, max +60 V dc, max 115 mA max

Audio Output:  
    Level  Continuously adjustable from 1 mV p-p to 1.7 V p-p 
    Output Impedance  600 Ohm, AC coupled 
    Modulation  1200 bps FSK half duplex, Bell 202 1200 Hz/2200 Hz

Audio Input:  
    Input Sensitivity 5 mV p-p 
    Input Dynamic Range  > 70 dB 
    Input Impedance  Unbalanced, 10 kOhm
(600 Ohm with jumper J3 installed)
    Max Input Voltage  ±12 V dc; 35 V p-p sinusoidal 

General:

Operating Modes  AX.25, KISS, XKISS, Linesub, MODEM 
LED Indicators  Power, Xmit, Rcv, Connected, Status, GPS Ant, GPS Valid
(user option on/off) 
Remote Control Access  All controller functions, user-defined password 
Operating Protocols  AX.25 Levels 1 and 2 (user-selectable) 
Embedded GPS Receiver (MT1200G only)  
Type Trimble Lassen iQ GPS module
Operational (COCOM) Limits
    Altitude
    Velocity
18,000 m
515 m/s
Note: either may be exceeded, but not both.

General L1 (1575.42 Mhz) frequency, C/A code, 12-channel, continuous tracking receiver.
Accuracy
    Horizontal
    Altitude
    Velocity
< 5 m (50 %), < 8 m (90 %)
< 10 m (50 %), < 16 m (90 %)
0.06 m/s
Acquisition times
    Reacquisition
    Hot Start
    Warm Start
    Cold Start (Autonomous Operation in Standard Sensitivity Mode)
< 2 s (90 %)
< 10 s (50 %), < 13 s (90 %)
< 38 s (50 %), < 42 s (90 %)
< 50 s (50 %), < 84 s (90 %)
Cold start requires no initialization.
Warm start implies last position, time, and
almanac are saved by backup power.
Hot start implies ephemeris also saved.