RIGblaster Advantage RB/AD/CUSB, Supplied: • RIGblaster Advantage Unit •(1) 1/8" Stereo Mini Plug Patch Cord, 6 ft •(1) 8-pin Screw-on Custom Mic Cable, 3 ft •Instant Setup Connectors for RIGblaster Advantage, Plus II, Plus and Pro •USB cable •CD-ROM •Owner's Manual •Accessory Kit •(8) White Jumpers •(5) Blue Shunt Jumpers Capabilities: •Internal sound card generates audio completely independently from PC's sound card •Single plug and play USB cable connection to PC - no separate audio/rig control cables or power supply needed •Mic input with PTT override and interrupt for automatic switching between voice and digital modes •Includes Instant Setup Connectors and cables for microphone configuration •Front panel mounted transmit and receive audio controls with VOX delay control •Rig control interfaces for CAT, CI-V or DB9 on radio •High speed (50 wpm) CW keying output for keyboard CW and RTTY software Completely Integrated Sound Card, •Eliminates need to reconfigure computer's internal sound card for digital mode operation •Frees computer's existing sound card to generate system sounds, music etc. without danger of spurious transmission Computer Interface

•Supplied with plug and play USB cable interface,

•USB provides positive PTT, CW/FSK keying, CAT/CI-V rig control, and sound card,

•Microsoft® certified USB drivers are automatically installed from Windows Update,

•Powered through USB cable, no wall supply needed,
Compatible with All Manufacturers' Radios,

•Pre-wired microphone jumper blocks known as ISCs enable users to match microphone connector wiring schemes without having to refer to wiring diagrams. Six ISCs are provided (three "Round Metal") and three "RJ45 Modular") to cover the most popular radios - Icom, Yaesu, Kenwood, JRCm SGC, and Elecraft.

•Older radios can usually be wired up with individual jumpers,

•Works with any radio that has an 8 pin round screw-on microphone connector or RJ45 modular telephone-style connector,

•Any radio with RJ25 6 wire microphone connector with the purchase of an optional FT100 style 6 wire modular mic. cable,

•Any radio with 4 pin round microphone connector with the purchase of an optional 4 pin mic cable,
Built-in Rig Control,

•CAT/CI-V and DB9 rig control interface built-in,
•Custom CAT/CI-V cables available as accessories,
•Only RIGblaster with RS232 (DB9) radio control,
True Keyed CW,

•In addition to the PTT keying circuit there is a fully isolated CW/FSK keying output for direct keying of your rig's CW or FSK jack for keyboard CW and RTTY software,

•Input for control of the additional fully isolated CW/FSK keying circuit as well as the PTT circuit is jumper selectable between serial port control pins: RTS, DTR, and TXD,
Mic/Keying/Audio Flexibility,

•Front panel mounted transmit and receive power level knobs makes it easy to adjust transmit/receive levels on the fly without having to make changes in software sound levels,

•No extra manual switches needed, two DPDT relays for truly automatic operation unlike other sound card interfaces,

•Simpler operation than the other brands, you never have to remember to push un-needed switches to make your station work,

•PTT override and interrupt enables the mic to override the computer or stop the computer program, perfect for contesting or SSTV operation,

•Rear panel RCA PTT switch/footswitch jack enables the PPT override and interrupt,

•Internal diagnostic TXD LED shows at a glance what the RIGblaster is doing,

•Properly matched and RF suppressed audio for your radio,

•Fully isolated transmit audio and PTT keying, unlike other interfaces that have little or no isolation,

•Positive and fully automatic PTT control supports almost 100 ham programs.