Second hand icom ic-756proiii hf 50 mhz transceiver
Click the image to enlarge

Second Hand Radio equipment

Second hand icom ic-756proiii hf 50 mhz transceiver

Good condition, with microphone, manual and power lead also boxed! Wide banded for 11m use!

£0.00
(£0.00 exc. VAT)
£999.00
(£999.00 exc. VAT)
Fast uk delivery
Worldwide delivery
In Stock
Qty:
0 Reward points
Product code: SH-IC-756III-3501
Download a pdf document for Second hand icom ic-756proiii hf 50 mhz transceiver

Want to be notified when this product is back in stock? Complete the form below and we'll send you an email when it is.

Finance Available

Radioworld now offer finance through our partners Close Brothers.

Add the item to your basket in the normal way and at checkout choose to make payment via Finance. You’ll then be taken through to our partners Pay4Later to make your finance application.

Item CostFinance OptionDepositMonthly PaymentsTotal Cost
£999.00
12 Months 14.9% APR
£99.90
£86.09
£1,132.97
£999.00
18 Months 14.9% APR
£99.90
£57.39
£1,132.97
£999.00
24 Months 14.9% APR
£99.90
£43.04
£1,132.97
£999.00
36 Months 14.9% APR
£99.90
£28.70
£1,132.97
£999.00
48 Months 14.9% APR
£99.90
£21.52
£1,132.97
£999.00
12 Months 19.5% APR
£99.90
£89.54
£1,174.32
£999.00
18 Months 19.5% APR
£99.90
£59.69
£1,174.32
£999.00
24 Months 19.5% APR
£99.90
£44.77
£1,174.32
£999.00
36 Months 19.5% APR
£99.90
£29.85
£1,174.32
£999.00
48 Months 19.5% APR
£99.90
£22.38
£1,174.32

Click here to recommend this product to a friend

Recommend a friend

Second hand icom ic-756proiii hf 50 mhz transceiver

Second hand icom ic-756proiii hf 50 mhz transceiver


The Icom 756 Pro III was the last member of the venerable "756" family that started with the 756, 756 Pro, 756 ProII. This latest version offers some incremental improvements over the previous 756 Pro II: Improved Third Order Intercept point of +30dBm

Real time spectrum scope (with mini-scope)

The IC-756 Pro II spectrum scope display occupied the lower half of the screen. The IC-756Pro III provides a selectable mini-scope display mode. This allows simultaneous display of the filter, memory-keyer and other menus along with a half-size spectrum-scope display.

60 Meter 5 MHz Band

Improved 1st filter and BPF for reduced distortion

Preamp changed to a noiseless feedback type to reduce second order distortion.

New ITU Morse "@" symbol

The new "@" symbol is provided even with the memory keyer enabled.

Programmable SSB transmit bandwidth

The IC-756 Pro II provided three selectable TOBW settings: WIDE/MID/NAR. The lower and upper -6dB points of the transmitted audio-frequency response are fixed for each setting. In the IC-756Pro III, it is possible to program each of the three settings individually with the following preset cutoff frequencies: Lower -6dB point: 100, 300 and 500 Hz., Upper -6dB point: 2.5, 2.7 and 2.9 kHz.

This permits the operator to configure his own custom WIDE/MID/NAR selections by mixing and matching low and high roll-off points.

Clock function displays local time and UTC time with time difference indication

Screen saver function to prolong LCD life and reduce burn-in.

General

Frequency coverage

RX: 0.03 - 60.000 MHz *1, *2

TX:

1.800 - 1.999 MHz

3.500 - 3.999 MHz

5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz

7.000 - 7.300 MHz

10.100 - 10.150 MHz *2

14.000 - 14.350 MHz *2

18.068 - 18.168 MHz *2

21.000 - 21.450 MHz *2

24.890 - 24.990 MHz *2

28.000 - 29.700 MHz *2

50.000 - 54.000 MHz *2

*1=some freq. bands are not guaranteed. *2=Depending on version

Mode: USB, LSB, CW, RTTY, AM, FM

Number of memory channels: 101 (99 regular, 2 scan edges)

Antenna connector: SO-239x2 and phono [RCA;(50 ohms)]

Usable temperature range: -10°C to +50°C; +14°F to +122°F

Frequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F)

Frequency resolution: 1Hz

Power supply requirement: 13.8 V DC (±15% negative ground)

Power consumption:

TX max power 23A

RX standby 3.0A (typ.)

RX max audio 3.5A (typ.)

Dimensions (projections not included): 340(W) x 111(H) x 285(D) mm; 13.37(W) x 4.37(H) x 11.22(D) inches

Weight: 9.6 kg; 21.2 lb.

ACC 1 connector: 8-pin DIN connector

ACC 2 connector: 7-pin DIN connector

CI-V connector: 2-conductor 3.5 (d) mm (1/8")

Display: 5-inch (diagonal) TFT color LCD

Transceiver

Output power (continually adjustable):

SSB/CW/RTTY/FM: 5 -100 Watts

AM: 5 - 40 Watts

Modulation system:

SSB: PSN modulation

AM: Low power modulation

FM: Phase modulation

Spurious emissions: 50 dB (HF bands), 60 dB (50 MHz band)

Carrier suppression: 40 dB

Unwanted sideband suppression: 55 dB

delta TX variable range: ±9.999 kHz

Microphone connector: 8-pin connector (600 ohms)

ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4")

KEY connector: 3-conductor 6.35 (d) mm (1/4")

SEND connector: Phono (RCA)

ALC connector: Phono (RCA)

Receiver

Receive system: Triple conversion superheterodyne

Intermediate frequencies:

1st: 64.455 MHz (for all modes)

2nd: 455 kHz (for all modes)

3rd: 36 kHz (for all modes)

Sensitivity (typical):

Frequency range (MHz)SSB, CW, RTTY (at 2.4 kHz BW)AM (at 6 kHz BW)FM (at 15 kHz BW)

0.50-1.799--13 µV--

1.80-27.990.16 µV *12 µV *1--

28.0-29.990.16 µV *12 µV *10.5 µV *1

50.0-54.00.13 µV *21 µV0.32 µV *2

10 db S/N for SSB, CW, RTTY and AM, 12 dB SINAD for FM

*1=pre-amp 1 is ON, *2=pre-amp 2 is ON

Squelch sensitivity (Pre-amp OFF):

SSB, RTTY, CW: Less than 5.6 µV

FM: Less than 1 µV

Selectivity (representative value):

SSB, RTTY (BW: 2.4 kHz): More than 2.4 kHz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 2.8 kHz/-60 dB

CW (BW: 500 Hz): More than 500 Hz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 700 Hz/-60 dB

AM (BW: 6 kHz): More than 6.0 kHz/-6 dB, Less than 15.0 kHz/-60 dB

FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB

Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band)

AF output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load

RIT variable range: ±9.999 kHz

PHONES connector: 2-pin connector 6.35 (d) mm (1/4")

EXT SP connector: 2-pin connector 3.5 (d) mm (1/4")/8 ohms

Specifications are subject to change without notice or obligation. UR

Antenna Tuner

Matching impedance range:

16.7 - 150 ohms unbalanced *1 (HF bands)

20 - 125 ohms unbalanced *2 (50 MHz band)

*1=Less than VSWR 3:1; *2=Less than VSWR 2.5:1

Minimum operating input power: 8 Watts

Tuning accuracy: VSWR 1.5:1 or less

Insertion loss: Less than 1.0 dB(after tuning)

Good condition, with microphone, manual and power lead also boxed! Wide banded for 11m use!

Our Price Match Promise means that if you find any of our Equipment at a lower advertised price elsewhere, we will match the price for you, subject to the below.

  • The product is identical to ours in brand, colour, size and model number.
  • The price must be the advertised price clearly on the competitor's online site.
  • The item must be in stock and available for immediate purchase (rather than available to order), with the authorised stockist able to complete delivery within 2-3 days.

Please fill out the form below. The details will be used to help us with your price promise request.

Your Details

Competitor Product

Weblink showing other retailers product at a reduced price, in stock and ready for dispatch

Product Details