Second Hand Yaesu FTDX5000 Limited HF Transceiver

Second Hand Yaesu FTDX5000 Limited HF Transceiver, Yaesu FTDX-5000 Limited Latest Edition, The Yaesu FTdx5000 is an awesome rig to look at, but it is even more impressive "under the hood". Yaesu engineers have achieved 112 dB dynamic range and an IP3 [3rd Order Intercept Point] of +40 dBm (CW, 500 Hz BW). Newly designed, extra sharp roofing filters for VFOA/Main receiver are selectable between 300 Hz (optional on some versions), 600 Hz, 3kHz, 6kHz, and 15kHz. Yaesu incorporates two of their famous custom-designed 32-bit floating-point DSP chips based on the TI TMS320C6727B running at 300 MHz one for VFO A and one for VFO B. Enjoy state of art on the transmit side with a pair of reliable VRF 150 FETS in a push-pull configuration yielding 200 watts (75 watts class A operation). Three electro-luminescent sub displays indicate sub frequency, graphical wave, and menu functions. The rear panel features a 9 MHz IF out from VFO Main receiver. Other enhancements include: large multi-function meter and variable CW audio peak filter Rx Frequency Range 30 kHz - 60 MHz (Operating) 1.8 - 29.7 MHz, 50 - 54 MHz (Specified performance, Amateur Bands only) Tx Frequency Range1.8 - 29.7 MHz, 50 - 54 MHz (Amateur Bands only) Frequency Stability ±0.05ppm (MP version, after 1 minute @ -10ºC to +60ºC) ±0.5ppm after 1 minute @ -10ºC to +60ºC Operating Temperature Range -10ºC to +60ºC Emission Modes A1A (CW), A3E (AM), J3E (LSB,USB), F3E (FM), F1B (RTTY), F1D (Packet), F2D (Packet) Frequency Steps 1/5/10Hz (SSB, CW, AM), 100Hz (FM) Antenna Impedance50Ω, unbalanced 16.7Ω - 150Ω, unbalanced (Tuner ON, 1.8 - 29.7 MHz Amateur Band) 25Ω - 100Ω, unbalanced (Tuner ON, 50 MHz Amateur Band) Power Consumption Rx (no signal) 70VA (approximate figures) Rx (signal present) 80VA Tx (200W) 720VA Supply Voltage AC 90V - 264V Dimensions (W x H x D, mm) 462 x 135 x 389 (w/o knob and connector) Weight (approx, kg) 21 TRANSMITTER Power Output 10 - 200 Watts (CW, LSB, USB, FM, RTTY, PKT) 5 - 50 Watts (AM carrier) 10 - 75 Watts (Class A: LSB, USB) Modulation Types J3E (SSB): Balanced A3E (AM): Low-Level (Early Stage) F3E (FM): Variable Reactance Harmonic FM Deviation ±5.0kHz/±2.5kHz Harmonic Radiation Better than -60dB (1.8 - 50 MHz Amateur bands) SSB Carrier Suppression At least 60dB below peak output Undesired Sideband Suppr. At least 60dB below peak output Audio Response (SSB) Not more than -6dB from 300 to 2700 Hz 3rd Order IMD -31dB @ 14 MHz, 100 Watts PEP -40dB @ 14 MHz, Class A: 75 Watts PEP Bandwidth 500 Hz (CW) 3.0 kHz (LSB,USB) 6.0 kHz (AM) 16 kHz (FM) Microphone Impedance 600Ω (200 to 10kΩ) RECEIVER Circuit Type VFO-A; Double-Conversion Superheterodyne VFO-B: Triple-Conversion Superheterodyne Intermediate Frequencies VFO-A; 9 MHz / 30 kHz (24 kHz for AM/FM) VFO-B; 40.455 MHz / 455 kHz / 30 kHz (24 MHz for AM/FM) Sensitivity SSB (2.4 kHz, 10dB S+N/N) 2µV (0.5 - 1.8 MHz, IPO1) 0.2µV (1.8 - 30 MHz, AMP2) 0.125µV (50 - 54 MHz, AMP2) AM (6 kHz, 10dB S+N/N, 30% modulation @ 400 Hz) 6µV (0.5 0 1.8 MHz, IPO1) 2µV (1.8 - 30 MHz, AMP2) 1µV 50 - 54 MHz, AMP2) FM (BW: 15 kHz, 12 dB SINAD) 0.5 µV (28 - 30 MHz, AMP2) 0.35 µV (50 - 54 MHz, AMP2) * There are no specifications in frequency ranges not listed * Squelch Sensitivity (AMP2) SSB / CW / AM 2µV (0.1 - 30 MHz) 2µV (50 - 54 MHz) FM 1µV (28 - 30 MHz) 1µV (50 - 54 MHz) * There are no specifications in frequency ranges not listed * Selectivity (-6 / -60dB) Mode -6db -60dB CW 0.5kHz or better 750Hz or less LSB,USB 2.4kHz or better 3.6kHz or less AM 6kHz or better 15kHz or less FM 12kHz or better 30kHz or less Image Rejection 70dB or better (1.8 - 29.7 MHz Amateur bands, VRF: ON) 60dB or better (50 MHz Amateur band) Maximum Audio Output 2.5W into 4Ω with 10% THD Audio Output Impedance 4 to 8Ω (4Ω: Nominal) Conducted Radiation Less than 4000 µµW Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and are guaranteed only within the Amateur Bands.