CBA IV Unit Discharge Range of 1-150W, Accuracy min. 10 mA and Voltage Range of 1-55V 500 Watt Amplifier Discharge Range of 10-550W, Accuracy min. 100 mA and Voltage Range of 1-55V * Note: If using CBA III, Extended Software is required to run 500W Amplifier.

Capabilities, Perform Fast, High Power Testing, Test at 5 times the power with a CBA amplifier in between a CBA and your battery

500 watt discharge with a single amp and a CBA, 1000 watt discharge with two amplifiers, a harness and a CBA

2000 watt discharge with four 20X* amplifiers, a harness and a CBA, Designed for commercial or industrial use

Test a Lithium cell at up to 120 amps / 500 watts with a single amplifier.Test a Nickel cell at 160 amps regulated down to .9 volts with a single amplifier,Test batteries at or near their current and temperature limits

Support for operation with one or more CBA 500 watt amplifiers and CBA IV (CBA III units require Extended license)

* 20X amplifiers are a special order item.

Test at Real World Load Conditions,

Increases 100 watt continuous capability of CBA to 500 watts,

Discharge rates at up to 500 watts or 160 amps maximum, whichever is higher,

High voltage testing at up to 55 volts; the equivalent of 1 to 38 NiCad or NiMh cells,

Extended Software License Unlocks Features for Serious Battery Testing,

Programmable automatic duty cycle test with up to 999 second on/off cycle periods,

Regulated constant power discharge (current goes up as battery voltage drops)

Temperature graphing with a recovery time option,

Ragone power density charting using battery weight (used for performance comparison of energy sources charting energy density (Watt-Hours/kg) vs power density (W/kg))

Test-lead resistance voltage calibration utility to give higher accuracy voltage readings right at the battery terminals,

Enables placement of user notes on graphs,

Easy-to-Use Software for Data Analysis,

User selected battery cell chemistry, number of cells and test current,

Software recommends safe tests based on user supplied battery information,

Automatic graph setup and scaling,

Measures and displays voltage, current, amp-hrs, watts and temperature*

Easy overlay comparisons of multiple graphs may be displayed saved and recalled,

Save, display and print battery test graphs and battery labels,

Plug and Play high speed USB interface, with easy to use and intuitive Windows® software supplied on CD ROM,

* Requires optional temperature probe,

Hardware Requirements,

CBA III or IV,

Computer System Requirements,

Basic Requirements: A PC with a Pentium 233 or better, At least an 800 X 600 graphics card and display monitor

98SE, W2K, XP, Vista®: 32 or 64 bit, Windows® 7: 32 or 64 bit, Windows® 8, Windows® 10

An available USB port,

Recommended: AMD or Intel 1.2 GHz or better,

Better than 800 X 600 graphics and display monitor,

Windows® XP or Vista® 32 or 64bit 1 GB RAM,

An available USB port (external hubs not supported)

For graph and label printing: Any Windows compatible, laser or ink jet, color or black and white, printer.

Avery 5160 labels are required for label printing.