Hambid for Ham radio, scanners, DAB, Shortwave & CB radios

sales@radioworld.co.ukResponse in 24 hours
Trustpilot
01922 414 796

Monday - Friday: 9:00am - 5:00pm

Saturday: 9:30am - 4:00pm

My basket: £0.00
0
Wishlist
Yaesu communication
Yaesu SCU-39 Wires-X Connection Cable Kit
Yaesu SCU-39 Wires-X Connection Cable Kit
Yaesu communication
Yaesu SCU-39 Wires-X Connection Cable Kit
£69.95 (£58.29 exc. VAT)
Download a PDF document for Yaesu SCU-39 Wires-X Connection Cable Kit
Fast UK
delivery
Worldwide
delivery
Add to wishlist
Product code:SCU-39
Brand:Yaesu communication

Users can easily establish and operate a WiRES-X Portable Node Station by directly connecting the FT2DR/E

to the PC with the SCU-39. The conventional HRI-200 internet interface kit is not required for the Portable

Digital Node function, and no fixed global IP address is necessary. Since users do not need to open an

Ethernet port, the WiRES-X communication from any location is possible - such as Hotel rooms, Airports,

Vehicle Wi-Fi, or even Wi-Fi Access Points.

With the new Portable Digital Node Function, users can gain access to WiRES-X Network directly by using the

USB connected FT2DR/E with the radios PTT and microphone. The need to have an additional radio to talk to

a node radio is no longer needed in order to enjoy the WiRES-X Network. The USB connected FT2DR/E can

also function as an Access Point for RF communication. Four different types of operation modes are available.

For more information, please refer to the operation manual which is posted on our official website

(www.yaesu.com).

Exciting new features of WiRES-X PC Software (V1.50) includes the following two updates:

- Sub-code Function: When selecting DG-ID ‘00’ in the WiRES-X software (under the transceiver settings)

you can select a Sub-code from “00” to “26”. When the DG-ID and sub-code are set to “00,” the node relays

C4FM digital signals of all DG-ID numbers. When a sub-code is set with a value of “01” – “26,” the node

relays C4FM digital signals with the sub-code that is matched. This will allow multiple open nodes (DG-ID

‘00’) to work within the same communication range; this function is useful to avoid interference between

nodes.

- Digital Only Room: A Digital Room can be set up if desired with the WiRES-X PC Software V1.50 (Note:

The HRI-200 is needed in order to create a room.)

Reviews