The Z-817 is FT-817/818 QRP transceiver ultimate autotuner for QRP radios including the Yaesu FT-817(D). The Z-817 interfaces to the CAT port (ACC) on the back of the FT-817 radio with the provided cable. Tuning could not be simpler; one button push on the tuner is all that is needed and the Z-817 takes care of the rest. It will switch to PKT mode, transmit a carrier, tune the tuner, then restore the radio to the previous model! 2000 memories cover 160 through 6 meters. Of course, the Z-817 will also function as a general-purpose antenna tuner with other QRP radios. Just transmit a carrier and press the tune button on the tuner. The Z-817 is powered by four AA internal Alkaline batteries (not included), so there are no additional cables required to use the Z-817. A coax jumper cable is needed for a fast hook-up. Latching relays are used so that power consumption is Zero when not tuning allowing a set of batteries to last about one year.

RF Power 0.1 to 20 watts SSB, CW, and digital modes.

Latching relays for ultra-low power consumption,

Battery-operated 4 x 1.5V Alkaline AA (not included),

Built-in CAT port interface. CAT thru port for computer connection. 38400 baud.

2000 memories when used with FT-817 interface (200 memories for other radios)

1.8 to 54 MHz coverage (continuous coverage for MARS)

Tunes 6 to 600 ohms (about 10:1 SWR range). 16 to 150 on 6M (about 3:1)

SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, etc.

Dimensions: 5.1” L, 4.7” W, 1.7” H. Weight: 9.3 ounces (without batteries).

Includes 1 foot CAT cable.