KiwiSDR is an SDR (software-defined radio) receiver for the entire frequency range from 10 kHz up to 30 MHz. The HF unit is installed on a Beaglebone single board computer (something like the Raspberry Pi). The distinct feature of the KiwiSDR is the built-in web interface (OpenWeb RX). No hassle with USB drivers, no need for extensive software installation, you just use your existing web browser (Chrome or Firefox). Just connect the SDR via Ethernet to your local network, hook up an antenna and power supply and fire up your browser. This makes the KiwiSDR very portable as it can be used with Windows, macOS, or Linux. The included GPS antenna is used for frequency calibration and time synchronization. Up to four users can listen to any frequency in the entire spectrum ranging from 10 kHz to 30 MHz at the same time. The tuning is done by clicking on the waterfall display, or by entering the frequency directly into the user panel. When the local router is properly configured you can connect to your KiwiSDR from any place in the world. There are already many KiwiSDRs accessible at any time, see the link below.

The software of the microcontroller and the hardware design is open source and freely available on kiwisdr.com/KiwiSDR.

The receiver is supplied with the complete kit, consisting of both boards (KiwiSDR, Beaglebone Green), a ready-to-use MicroSD memory card with the software, parts for the case, and a GPS antenna. All you need for instant operation is a 5V/1A power supply and an antenna. Size: 124 x 83 34 mm.

included in shipment: Kiwi-SDR receiver, Beagle Bone Green, GPS Antenna, Software on a Micro-SD card, Enclosure kit, assembly required.