Power Distribution Board RIGrunner is the most convenient and safest way to connect all of your 12-volt equipment to a power source. The 4010S+ is the only power strip that has solid-state relay controlled automatic or manual on/off switching. Whatever device is plugged into the master jack automatically controls power switching of nine switched outlets. It uses the excellent Anderson Powerpole® connectors, standardizing all of your 12 VDC connections.

40 amp 12 VDC continuous duty with 10 outlets - one always-on "Master" outlet and nine switched outlets,

Switched outlets controlled by solid-state relay with temperature and over-current protection,

Three-position control switch turns switched outlets on, off or enables automatic operation,

Precision voltage monitoring with visual/audible alarm for over and under-voltage,

New Features: PWRguard shut-off when voltage is out of range,

(Internal) USB port for setting operating features and the trip points (USB cable not included),

Ability to set the master port sensitivity level,

Remote access to turn ON/OFF via the USB port,

Optional vehicle timer mode - auto shut off when the engine is off after a set time (1 second to 18 hours)

Optional automatic turn on when vehicle engine starts,

Jumper for power-saving mode turns LEDs off when the unit is off.

Specifications, Overall Dimensions (maximum, w/o cables)1.4" H x 11.75" W x 2.79" D

Weight15 1/4 oz.

Maximum total current 40 amps,

Maximum single individual outlet current40 amps (fuse protected),

ICAS current rating (fuse limited)37 amps,

Precision comparator window points11.5,15.0 Volts,

Metering Accuracy better than 2% @ 25 deg.C.

Audible alert SPL output~ 60dB SPL @ 1 meter,

Maximum voltage19 volts,

Reverse polarity protection (meter circuit)Yes,

4010S Automatic switching threshold most radios with appropriate master outlet fuse.