Icom PW-1 HF / 6m 1kW Linear Amplifier
Click the image to enlarge

Icom communication

Icom PW-1 HF / 6m 1kW Linear Amplifier

Fits Most Icom Transceivers, You Will Need the Opc-599 for the Ic-7410, Ic-7200, Ic-718, Ic-7100 and Ic-9100 Radios,

£0.00
(£0.00 exc. VAT)
£4,999.96
(£4,166.63 exc. VAT)
Qty:
View video
0 Reward points
Product code: PW-1 ICOM
Download a pdf document for Icom PW-1 HF / 6m 1kW Linear Amplifier
Finance available on baskets over £250 view details

Want to be notified when this product is back in stock? Complete the form below and we'll send you an email when it is.

Finance Available

Radioworld now offer finance through our partners Close Brothers.

Add the item to your basket in the normal way and at checkout choose to make payment via Finance. You’ll then be taken through to our partners Pay4Later to make your finance application.

Item CostFinance OptionDepositMonthly PaymentsTotal Cost
£4,999.96
12 Months 14.9% APR
£500.00
£430.87
£5,670.45
£4,999.96
18 Months 14.9% APR
£500.00
£287.25
£5,670.45
£4,999.96
24 Months 14.9% APR
£500.00
£215.44
£5,670.45
£4,999.96
36 Months 14.9% APR
£500.00
£143.62
£5,670.45
£4,999.96
48 Months 14.9% APR
£500.00
£107.72
£5,670.45
£4,999.96
12 Months 19.5% APR
£500.00
£448.12
£5,877.45
£4,999.96
18 Months 19.5% APR
£500.00
£298.75
£5,877.45
£4,999.96
24 Months 19.5% APR
£500.00
£224.06
£5,877.45
£4,999.96
36 Months 19.5% APR
£500.00
£149.37
£5,877.45
£4,999.96
48 Months 19.5% APR
£500.00
£112.03
£5,877.45

The Icom Pw-1 Hf Amplifier With Wide Frequency Coverage With 1kw Output. All Hf Bands Plus 50 Mhz Are Covered.

The Ic-pw1 Provides a Stable, Clean and Low Distortion 1 Kw From 1.8 Mhz to 50 Mhz. In Addition, Full Duty Cycle (Even During More Demanding Rtty or Sstv Operation) and Full Break -in Operation Are Possible.

Great for Dxpeditions or Contest Operation. Wide Alc Adjustable Range Internal Circuitry Allows the Alc to Be Adjusted Over a Wide Range. This Means That the Ic-pw1 Can Be Used With Almost Any Hf, 6 M or Hf/6 M Rigs - Not Only Icom Rigs.

Compact Body Dimensions, Including Amplifier, Power Supply, Tuner and Controller, Are Only 350 (W), 269(H), 1378 (D) Mm. (Approx.) and, Because the Controller is Detachable,

The Ic-pw1 Can Be Installed Almost Anywhere in Your Shack.

Dimensions: 350 (W),269 (H), 378 (D)mm Weight: 35kg (Approx.)

Auto Band Changing

Four Antenna Connectors

Built in Auto Antenna Tuner

Capable of Matching 3:1 Swr on Hf, and 2.5:1 Swr on 6 Meters

Matches a Wide Array of Antennas

4 Cooling Fans

100% Duty Cycle (Even During Rtty or Sstv)

Full Break-in Operation

Automatic Ac Input Voltage Selector

Dual Cpus for System Operation, Monitoring and Control

Cpu Memories for Automatic Antenna Selection and Switching for Fast Band/antenna Changes. Works With Almost Any Make of Hf, 6 Meter, or Hf / 6m Transceiver... Not Just Icom Rigs. Check With Your Dealer.

Frequency Coverage (Mhz):

1.800 - 1.999

3.500 - 3.999

7.000 - 7.300

10.100 - 10.150

14.000 - 14.350 (Revised 5/27/99)

1.8068 - 18.168 21.000 - 21.450 (Revised 5/27/99)

24.890 - 24.990 (Revised 5/27/99)

28.000 - 28.700 (Revised 5/27/99)

50.000 - 54.000 (Revised 5/27/99)

Current Drain:

Less Than 15 a (Max. Output at 200 V)

Less Than 20 a (Max. Output at 100 V)

Usable Temperature Range: -10°c to +40°c; +14°f to +104°f.

Power Supply Requirements: 180 - 264 V Ac or 90 - 132 V Ac (Single Phase; 50 / 60 Hz)

Duty Cycle: Full Duty

Input Connector: So-239 X 2 (50 Ohm)

Output Connector: So-239 X 4 (50 Ohm)

Linear Amplifier

Output Power:

Cw, Rtty: 1 Kw at 180 - 264 V Ac; 500 W at 90 - 132 V Ac Input

Ssb 1 Kw Pep at 180 - 264 V Ac; 500 W Pep at 90 - 132 V Ac Input

Driving Power: Max. 100 W

Spurious Emissions:

Less Than -60 Db (Hf Bands)

Less Than -50 Db (50 Mhz)

Antenna Tuner

Output Matching Range (Tuner Switch on):

16.7 Ohms to 150 Ohms Impedance (Hf Bands)

20.0 Ohms to 125 Ohms Impedance (50 Mhz)

Auto Tuning Accuracy: Vswr 1.5:1 or Less

Min. Required Input Power: 60 W

Insertion Loss: Less Than 1 Db (After Tuning)

Supplied Accessories

Controller Separation Cable

Acc Cables

Coaxial Cable With Pl-259 Plugs

Works With Icom Ic-7700, Ic-7800, Ic-7600, Ic-7000, Ic-718, Ic-7400, Ic-706,

Fits Most Icom Transceivers, You Will Need the Opc-599 for the Ic-7410, Ic-7200, Ic-718, Ic-7100 and Ic-9100 Radios,