We are delighted to introduce these fantastic USA manufactured antennas to the UK. For many an End Fed antenna is the easiest solution to their property. These End fed antennas are unique, as they are resonant on 8 bands and DO NOT require a tuner to operate. With a power handling of 1 kW they will handle enough power for the majority of Amateurs.

Multi band End Fed Half Wave Antenna

Resonant on 80/40/30/20/17/15/12/10m

130 Feet (39.6m) long

NO TUNER needed!

Power Handling 1kW-max.

This is an End-Fed Half-Wave (EFHW*) antenna for 80/40/30/20/17/15/12 and 10m bands. Unlike many END FED antennas on the market, this one does not require the Antenna Tuner to operate. It is resonant Half wave on 80m (3.5MHz) therefore also resonant on second, third and fourth harmonics etc. Due High Impedance feed point, the antenna is less height dependent. You can put it up at 10 or 50 feet in the air without much change in VSWR values.

Various installations such as horizontal, vertical, as inverted V, as inverted L, zigzag etc. are possible. Measured VSWRs in the gallery are taken with the antenna in an inverted V shape with the center of wire at 20 feet and ends at few feet above ground, your values could vary with way and height of installation.

NO TUNER needed!

NO counterpoise needed! (Grounding recommended*)

Frequency coverage: 3.5-30MHz

Resonant on 80/40/30/20/17/15/12/10m

Wire length ~130 feet

Power Handling: 1kW I.C.A.S

Stainless Steel hardware

Stealth Marine #18 AWG black wire

Connector: Silver/Teflon SO-239

*Grounding at the transformer box or end of the coaxial cable is recommended for protection of your equipment from an electrostatic buildup in order to prevent ESD- electrostatic discharge. NOTE: grounding does not affect antenna tuning.